Yamaha MG-82CX

info pmesanan hub.082 327 676 797

• Frequency Response: STEREO OUT, EFFECT SEND (AUX SEND*), MONITOR OUT, REC OUT
• GAIN: min (CH 1/5/6) 20Hz 20 Hz Nominal output level @ 1kHz: -3.0 1.0 dB
• Total Harmonic Distortion (THD + N) STEREO OUT, +14 dBu @ 20 Hz-20 kHz, Input GAIN Control at minimum : 0.1%
• Hum & Noise:
• CH INPUT 1,2 MIC, EIN (Equivalent Input Noise): Rs = 150 Ohms, GAIN: maximum (CH. 1, 2): -128 dBu
• STEREO OUT, STEREO Master control at nominal level and all channel Level controls at minimum: -87 dBu
• EFFECT SEND (AUX SEND), all CH. EFFECT (AUX) controls at minimal: 85 dBu
• STEREO OUT, STEREO Master Control and one CH fader at nominal level (Ch1,2) : -64 dBu
• STEREO OUT Residual Output Noise 100 dB
• Crosstalk (1 kHz): Adjacent Input CH 1, 2: -70 dB; Input to Output STEREO L/R, CH 1-2, PAN: panned hard left or right: -70 dB
• Phantom Voltage MIC: + 48V
• Input HPF: CH 1-5/6, 80 Hz, 12 dB/oct
• Input equalization CH 1-5/6 HIGH: 10 kHz (shelving), MID: 2.5 kHz (peaking), LOW: 100 Hz (shelving); CH 7/8, 9/10 HIGH: 10 kHz (shelving), LOW: 100 Hz (shelving)
• PEAK Indicator: Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for CH 3/4, 5/6) reaches -3 dB below clipping (+17 dBu).
• Internal Digital Effect* : 16 PROGRAM, PARAMETER control, Foot Switch (Digital Effect On/Off)
• LED Level Meter, Pre MONITOR Level, 2 x 7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB), PEAK lights if the signal level reaches 3 dB below the clipping level.
• Power Supply Adaptor PA-10: AC 35 VCT, 0.62 A, Cable Length = 3.6 m
• Power Consumption: 21 W
• Dimensions (l x w x h): 15.4" x 14.2" x 5.3"
• Weight: 8.8 lbs

• 8-input, 2-bus design
• Built-in DSP for high quality effects
• 3-band EQ on inputs
• Microphone stand mountable (requires BMS-10A)