Yamaha MG-124CX

INFO PMESANAN HUB.082 327 676 797

• Frequency Response: STEREO OUT, GROUP OUT, EFFECT/AUX (AUX1, 2*), SEND, MONITOR OUT, REC OUT: -3.0 1.0 dB
• Total Harmonic Distortion (THD + N) STEREO OUT, +14 dBu @ 20 Hz-20 kHz, Input GAIN Control at minimum : 0.1%
• Hum & Noise:
• CH INPUT 1-4 MIC, EIN (Equivalent Input Noise): Rs = 150 Ohms, GAIN: maximum: -128 dBu
• STEREO OUT & GROUP OUT, STEREO OUT, GROUP Master fader at nominal level
• and all channels' ST and 1-2 switches off: -88 dBu
• EFFECT/AUX (AUX1, 2*) SEND, Master EFFECT/AUX (AUX1, 2) control at nominal level and all CH EFFECT/AUX (AUX1, 2) controls at minimum.: -81 dBu
• STEREO OUT & GROUP OUT, STEREO, GROUP Master fader and one CH fader
• at nominal level: -64 dBu
• STEREO OUT Residual Output Noise -98 dB
• Crosstalk (1 kHz): Adjacent Input CH 1-4: -70 dB; Input to Output STEREO L/R, CH 1-4, PAN: panned hard left or right: -70 dB
• Phantom Voltage MIC: + 48V
• Input HPF: CH 1-7/8, 80 Hz, 12 dB/oct
• Input equalization CH 1-7/8 HIGH: 10 kHz (shelving), MID: 2.5 kHz (peaking), LOW: 100 Hz (shelving); CH 9/10-11/12 HIGH: 10 kHz (shelving), LOW: 100 Hz (shelving)
• PEAK Indicator: Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for CH 5/6, 7/8) reaches -3 dB below clipping (+17 dBu).
• Internal Digital Effect* : 16 PROGRAM, PARAMETER control, Foot Switch (Digital Effect On/Off)
• LED Level Meter Pre MONITOR Level: 2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB), PEAK lights if the signal level reaches 3 dB below the clipping level.
• Power Supply Adaptor PA-20: AC 35 VCT, 0.94 A, Cable Length = 3.6 m
• Power Consumption: 30 W
• Dimensions (W x H x D): 19.5" x 18.5" x 7.3" (346.2 mm x 86.1 mm x 436.6 mm)
• Weight: 16.5 lbs (3.2 kg)

• 12-input, 4-bus design
• 4 channels of single-knob compression
• Built-in DSP for high quality effects
• 3-band EQ on inputs
• Illuminated Channel On/Off switches